Development docs, for main @ 60ec1d6 - what's coming, not yet released. This page for v2026.11.13, the latest release →

Clusters

A cluster is a group of nodes the Controller keeps alike: one HAProxy configuration on every member, their stick tables replicated between them, their certificates and keys carried from member to member, VRRP configured from one template, and each member locked against changes made behind the cluster’s back. This page is how to run one through the Controller - its Clusters tab, or its API - or, for a fleet without a Controller, with janusctl cluster (without a Controller); how it works is the cluster design.

The Clusters tab's page of cluster edge-par: in sync, version 1, managing HAProxy's configuration and files; its two members, edge-par-1 (where the secrets come from) and edge-par-2, each running version 1 with its peer up and the stick tables in sync

What a cluster gives

One configuration, versioned: haproxy.cfg, HAProxy’s files (maps, error pages), and templates for keepalived.conf, bird.conf and firewall.nft rendered for each member - its VRRP priority, its router ID, its peers’ addresses. A version is applied one member at a time, checked on the first before any is touched.
Stick tables replicated over HAProxy’s peers protocol, mutual TLS between the members: sessions, counters and rate limits follow a client from one member to another, and survive a reload or a failover.
Secrets that never leave the nodes for the Controller: certificates and their keys, the Let’s Encrypt certificates, the TLS ticket key ring go from one member to the others over their own mutual TLS.
Locks: what the cluster manages can only be changed through it. A member’s own administrator can take a domain back for an emergency - the cluster then reports the member as drifted, and never overwrites it by itself.

Before you start

The nodes trust the Controller’s fleet (securing the fleet): the cluster acts on its members through it.
They run the same image - the same extensions, HAProxy branch and kernel; keepalived in it for VRRP, bird for BGP.
They reach each other on TCP 9505 (the API, which secrets are pulled over) and 10057 (HAProxy’s peers). A member’s firewall must let the others in on both.
Your haproxy.cfg names peers janus on the stick tables to replicate (your haproxy.cfg):

frontend fe
    bind :443 ssl crt /etc/haproxy/files/certs/www.pem tls-ticket-keys /etc/haproxy/cluster/tls-ticket-keys
    stick-table type ip size 100k expire 30m store http_req_rate(10s) peers janus
    http-request track-sc0 src

Creating one

From nodes the Controller has, one of them the source: its configuration becomes the cluster’s first version, its certificates and keys every member’s. On the page: Clusters, New cluster - its name, then the nodes that join it, each with its member name and the address the others reach it on, and the source. Through the API:

curl -X POST https://controller:8080/api/clusters -H "Authorization: Bearer $JANUS_TOKEN" -d '{
  "name": "edge",
  "source": "6f1c2e3a9b7d0451",
  "members": [
    {"node_id": "6f1c2e3a9b7d0451", "name": "lb-1", "address": "192.0.2.11"},
    {"node_id": "a03be1c47d5e9f20", "name": "lb-2", "address": "192.0.2.12"}
  ]
}'

name: a label - letters, digits, dashes.
A member’s name is HAProxy’s peer name; address is where the other members reach it - left out, the address the Controller reaches it at, when that isn’t a loopback or a NAT.
managed - what the cluster manages from the start - is ["haproxy", "files"] by default; VRRP, BGP and the firewall come with a version carrying their template (below).

The answer is 202: the cluster is created in the background - checks (the fleet, the image, HAProxy healthy, each member reaching the others), a member certificate for each (its key made on the node), the first version taken from the source, the secrets pulled - first, as the version may name a file holding a key - and the version applied. GET /api/clusters/{id} follows it: busy while it runs, error if it failed, problems for whatever wants a look.

On new machines

Or the Controller makes the members: New cluster, New machines - how many, the hypervisors they may go to, their size, release, extensions and network (DHCP), and the anti-affinity:

required (the default): each machine on a physical host of its own. With fewer hosts than machines, the cluster is refused before anything is made, naming the hosts found;
preferred: hosts of their own first, then the least busy - the cluster’s page says which members share a host;
off: wherever there is the most memory.

Among the hosts the rule allows, the one with the most memory free goes first, so the load spreads; the order of the hypervisors given only breaks ties. A host without room for one more machine - what it keeps free (a twentieth, 512 MiB at least) aside - is never picked: too little memory anywhere refuses the cluster before anything is made, saying what each host has. A recycle or a member more is placed the same way.

Two hypervisor records reaching the same host count as one: the Controller asks each which host it is (libvirt: the SSH host key it pinned for the record; Proxmox: the node’s name). The machines are named after the cluster - edge-1, edge-2… -, the Controller waits until they register and trust the fleet, then makes the cluster from them, the first one the source. A failure before that destroys the machines it made.

curl -X POST https://controller:8080/api/clusters -H "Authorization: Bearer $JANUS_TOKEN" -d '{
  "name": "edge",
  "machines": {
    "count": 3,
    "anti_affinity": "required",
    "hypervisors": ["kvm01-id", "kvm02-id", "pve-c-id"],
    "spec": {"vcpus": 2, "memory_mib": 2048, "version": "v2026.10.24",
             "nics": [{"network": "lab-mgmt", "name": "eth0", "mode": "dhcp"}]}
  }
}'

spec is a machine’s (hypervisors) without its name and hypervisor, which are the Controller’s to give; its networks must exist on every hypervisor given. The cluster keeps its placement: a member recycled into a new machine goes where no other member runs - the host of the member it replaces counts as free, taken last. Each member shows the host it runs on, as its hypervisor last said: a Proxmox HA migration that brings two members together shows on the page.

Deleting such a cluster - Delete, its name typed - leaves its machines running as nodes on their own; tick Delete the members’ virtual machines too (?machines=destroy) and they are destroyed, disks included, once they left the cluster. A member that isn’t one of the Controller’s machines stays either way.

From a node

A load balancer already serving - one node, its configuration, files and certificates built over time - becomes a cluster of new machines without being touched: in the same form, Start from that node ("seed_from": "<node id>" in machines).

The first machine takes the node’s state before the cluster is made: its HAProxy configuration and history, its files, uploaded and Let’s Encrypt certificates, its settings and kernel tuning - not its identity (its CA and keys) nor its network (replacing a node).
The state goes from node to node over their own mutual TLS: the Controller only carries the new machine’s signing request and the node’s ten-minute certificate for one export - the node grants it, and says so in its log. Then the machine restarts into the state, and the cluster is made from it: its version 1 is the node’s configuration, the other machines get it and pull the keys from it.
The node itself stays as it is, serving, in no cluster. Move its traffic over when you are ready - its address to the cluster’s virtual IP, or your routers to the members -, then remove it.
The node must trust the Controller’s fleet and run a version that knows it (v2026.10.25-3 or later); its extensions are what its configuration needs, so give the machines those - and, for a virtual IP, keepalived.
A bind on an address only that node has: Janus sets net.ipv4.ip_nonlocal_bind by default, so the machines’ HAProxy starts and binds it too - and gets nothing there while the node holds it. Once the node is gone, that address can become the cluster’s virtual IP (VRRP): the members serve it with the configuration as it is. A node that saved ip_nonlocal_bind at 0 hands that over too: the first machine’s HAProxy then refuses to start, and the creation stops, saying so - bind *, or let it bind addresses it doesn’t have, first.

The configuration

On the page, a cluster’s Configuration tab: its versions, newest first, and each one’s files; Edit makes a new version from the one shown, Apply shows what each file changes from the version the members run and what the cluster will manage, and asks first.

Through the API, a new version starts from the cluster’s current one (base: another), adds or replaces files and takes away delete:

curl -X POST https://controller:8080/api/clusters/$CLUSTER/versions -H "Authorization: Bearer $JANUS_TOKEN" -d '{
  "files": {"keepalived.conf": "...", "files/maps/hosts.map": "example.test be_web\n"},
  "note": "VRRP"
}'

Its files: haproxy.cfg, files/<name> (HAProxy’s files that hold no private key - those go through the cluster’s certificates, below), keepalived.conf, bird.conf, firewall.nft. The last three are templates (Go’s), rendered for each member:

In a template	What it is
`{{ .Member.Name }}`, `{{ .Member.Index }}`	The member’s name, and its rank from 1
`{{ .Member.Address }}`	Its address
`{{ .Member.Vars.priority }}`	One of its variables - set with `PATCH /api/clusters/{id}` `{"vars": {"lb-1": {"priority": "150"}}}`
`{{ range .Peers }}{{ .Address }}{{ end }}`	The other members, each with the same fields
`{{ .Cluster.ID }}`, `{{ .Cluster.Name }}`	The cluster

A variable a member lacks is an error, not an empty value. A VRRP instance for a cluster, each member its priority and its peers:

vrrp_instance front {
    state BACKUP
    interface eth1
    virtual_router_id 51
    priority {{ .Member.Vars.priority }}
    advert_int 0.2
    unicast_src_ip {{ .Member.Address }}
    unicast_peer {
    {{- range .Peers }}
        {{ .Address }}
    {{- end }}
    }
    track_file {
        haproxy weight -100
    }
    virtual_ipaddress {
        192.0.2.100/24
    }
}

Then apply it - managed when the cluster starts or stops managing a domain:

curl -X POST https://controller:8080/api/clusters/$CLUSTER/apply -H "Authorization: Bearer $JANUS_TOKEN" \
  -d '{"version": 2, "managed": ["haproxy", "files", "vrrp"]}'

The version is rendered for every member first, checked on the first member (haproxy -c, each daemon’s own check), then applied one member at a time: the files, HAProxy, the files the version no longer has, the firewall on trial and confirmed, VRRP, BGP - and before the next member, the member’s stick tables learnt back from its peers (a reloaded HAProxy gets them from a peer after about 5 seconds: members reloaded together would lose them). The first failure stops it: the members before run the new version, the others the one they ran, and the cluster says which. Going back is applying an older version.

Locks and drift

On a member, a write to what the cluster manages is refused, whoever makes it, unless the Controller makes it for that cluster:

HAProxy's configuration is managed by cluster edge: change it on the cluster, or release this node's lock first (janusctl cluster release haproxy) - the cluster then reports this node as drifted

A member’s page on the Controller doesn’t offer those writes: its top bar names the cluster - with the member’s VRRP role when the cluster manages VRRP, and its BGP state when it manages BGP: what the node announces (“BGP announcing”, “BGP withdrawn” when its haproxy_* routes are held down, “BGP down” without a session), and the router’s choice when a read-only RouterOS hook reads it (“router: multipath”, “master”, “backup”, “absent”) -, and the pages of what the cluster manages say so, with a link to the cluster. On the Nodes page, a cluster’s members are shown together.

For an emergency on one node, its administrator releases the domain (janusctl -n lb-2 cluster release haproxy, or Release this node’s lock… on the page) and changes it. The cluster sees it at its next look - every 10 minutes, or POST /api/clusters/{id}/check - and reports the member as drifted, its configuration left as it is. The next apply puts it back and locks it again. Runtime changes - a server’s state, maps and ACLs, stick table entries, the firewall’s sets - are each node’s and never locked.

Certificates and keys

A certificate goes to the cluster, never to a member - on the page, the cluster’s Certificates tab; through the API:

curl -X POST https://controller:8080/api/clusters/$CLUSTER/certificates -H "Authorization: Bearer $JANUS_TOKEN" \
  -d "$(jq -n --rawfile pem www.pem '{name: "www", pem: $pem}')"

It is relayed to the member the secrets come from (secrets_from, the source by default) - never kept by the Controller - and the others pull it from there over their own mutual TLS. POST /api/clusters/{id}/pull has them pull everything again: the uploaded certificates, the files holding a key, the Let’s Encrypt certificates, the TLS ticket key ring.

The ticket key ring rotates every day on that member, and the others pull it: a client resumes its TLS session on any member - as long as they serve it the same certificate. When a member leaves, it makes a ring of its own and the others’ is renewed - every key replaced - so it can neither read the tickets the cluster issues nor forge one; clients make one full handshake. If the member the secrets come from can’t renew it then, the cluster’s page says so and the next check tries again.

Let’s Encrypt

One member orders the cluster’s Let’s Encrypt certificates - the one the secrets come from -, the others order nothing:

They hold its configuration - the certificates, the account’s settings, the DNS providers and their credentials, how it reaches the CA -, pulled from it over their mutual TLS, never through the Controller; not its account key: each member keeps its own.
They serve its certificates, pulled the same way. Every check - every 10 minutes on the Controller, janusctl cluster check without it - compares each member’s certificates with the orderer’s: a renewal, a certificate added or removed, and the member pulls them again, the journal saying so (“lb-2 pulled lb-1’s renewed certificate(s): site”).
They answer HTTP-01 challenges with the orderer’s account: behind a virtual IP or a balancer, a challenge may reach any member.
A renewal asked of another member is refused, naming the orderer; the node’s page and janusctl haproxy acme status say “Ordered by”.
When the secrets’ source changes - chosen on the page, or the orderer removed or recycled -, the new one orders with the configuration it already holds, under its own account; the others answer with that account from the next check.

Configure Let’s Encrypt on the member the secrets come from - or on a node before the cluster is made from it.

Members

On the page, the cluster’s Members tab: each member’s state, and for an admin Drain, its Variables, remove, Add a member, and the member the secrets come from. Through the API:

POST /api/clusters/{id}/members {"node_id": ..., "name": ..., "address": ...}: checked, given its certificate, the others told, the secrets pulled, the cluster’s version applied.
DELETE /api/clusters/{id}/members/{name}: drained first - its virtual IPs and routes move to the others -, out of the cluster, the others told. ?force=true for a node that doesn’t answer any more. The node stays drained - it may still run the cluster’s VRRP or BGP configuration - and says so (janusctl -n NODE cluster get): janusctl -n NODE cluster undrain puts it back in service on its own; added to a cluster again, it is back in service by itself.
POST /api/clusters/{id}/members/{name}/drain and /undrain: out of service and back, without leaving. A drain holds across reboots: the node keeps it on its STATE partition and puts it back as janusd starts, before keepalived or BIRD can announce anything - an update, a crash or a hypervisor restart brings the member back drained, until it is undrained. A member that comes back in service anyway - a node on a release that kept no drain across a reboot - is drained again by the next check (within a minute once it answers), and the journal says why. One undrained on the node itself (janusctl -n NODE cluster undrain) stays in service: the cluster follows it.
A node that is a member can’t be removed from the Controller: it leaves its cluster first.

Updating a cluster

Update moves the members to a new release in place, one at a time: the same machines, addresses, MACs and names. Each member gets its own A/B update:

The cluster is healthy first: every other member in service - announcing its routes, with BGP -, its HAProxy answering, its peers connected and its stick tables in sync. Otherwise nothing is touched, and the answer names the member. Its update is found while it still serves - the image factory’s build waited for: what fails there leaves it in service, and the Controller’s own requests never go through the traffic its drain moves (a factory it reaches through the cluster’s address).
The member is drained: the balancer told first and its drain delay waited, then its virtual IPs and routes move to the others. It serves what still reaches it - but with a virtual IP or an anycast address, the packets of its established connections now reach the others, which reset them, unless they are handed over.
Its node updates itself: the release’s bundle - the image factory’s for the member’s image -, checked by the node, confirmed only once HAProxy is healthy on the new slot, reverted otherwise. It reboots through the firmware, or kexec.
The member is back when it runs the release on its other slot, janusd answers, HAProxy is healthy and its peers are connected - within 20 minutes. A drain holds across the reboot, so it comes back out of service: keepalived BACKUP, BIRD started with its haproxy_* protocols down - no route announced, not even for a moment.
Its stick tables are learnt from its peers, then it is undrained, the balancer told it serves again. With BGP, the next member waits until this one announces its routes again: its sessions are re-established after its reboot, which takes a few seconds - draining the next one earlier would leave the routers no member to send to.

The members go in the order you give. By default a VRRP cluster’s BACKUP members go first and its MASTER last, so each virtual IP moves once; a BGP or ECMP cluster keeps its members’ order. A member already on the release is skipped: run the update again to resume one that stopped. The first failure stops it, the members after it left alone:

a member whose update didn’t start - a bundle refused, say - is back in service as it was;
a member that reverted - its new release didn’t confirm healthy - is back in service on its previous release, and the journal and the cluster’s problems say so;
a member not back within the 20 minutes stays drained, with a problem on the cluster: look at its console, undrain it once it serves.

Another image changes the members’ extensions, HAProxy branch or kernel track as they update - a member’s image then differs from the others’ until the update ends. Each step goes in the cluster’s journal (upgrade).

While the members change

The Update dialog has three choices for the traffic; one the cluster can’t have is greyed out, and says why:

Wait for the balancer to take each member back before the next one goes. A member’s node saying it announces its routes again - or is undrained - isn’t the router or the load balancer in front acting on it. When the cluster’s balancer hook can say, it is asked too (Waiting for the balancer): every other member in service before one goes, the member out of it once drained - before its node reboots -, back in it once undrained - before the next one goes. Each wait lasts two minutes at most; then the update stops there, the members after it left alone.
A pause between members: once a member is back in service, the next one waits that long - its clients settled on it. Up to 30 minutes.
Hand the open connections over: a member’s connections keep working while it is out, and the others’ once it is back (Handing connections over).

Handing connections over

In a cluster whose members all hold the service addresses - an anycast address announced over BGP, a router’s ECMP routes -, the router spreads the connections over the members by a hash of their addresses and ports. An established connection lives on the member that accepted it. Take a member out and the router sends its connections’ packets to the others, which have no such connection and reset it. Bring it back and the hash sends part of the connections opened meanwhile to it, reset in turn. An HTTP client opens another connection and nobody notices. A long-lived one - a WebSocket, a download, a streamed response, a Syncthing relay session - is cut, two or three times in an update.

With the handoff, a member copies the packets of another member’s connections to it - nftables’ dup, to that member’s own address on the link - and drops its own copy: the member that has the connection answers, straight to the client. For each member, in turn:

It refuses new connections for a moment: their SYNs are dropped, and their senders try again a second later - by then on another member. Then the others read its connections.
It is drained. The router now sends its connections’ packets to the others, which copy them to it. It serves them until they end, or until the grace runs out (2 minutes by default, up to an hour). The others read its connections again every few seconds. The update goes on as soon as it has none left.
It updates and reboots: the connections still open then are cut. One that never ends is cut once, not two or three times.
Back, before it is undrained, it reads the others’ connections and copies their packets to them - an hour by default -, and for two minutes it holds what it has no trace of: a packet of a connection opened elsewhere while the router was taking it back is dropped, not reset - its sender sends it again, and the next reading copies it.

It takes, on every member:

the nftables extension in its image - the copies are nftables rules, whether or not the node has a firewall;
a release whose kernel can copy packets - from the one that brought the handoff;
the same service addresses: a VRRP cluster can’t - its virtual IP moves with its connections’ packets, and the member left out no longer has it.

The dialog says which is missing, member by member. On a node, janusctl cluster get says whether it can (Handoff: unavailable - ...) and what it does: the members whose connections it copies, how many, the packets copied so far, a refusal or a hold in effect.

Mind:

A firewall ruleset that filters what leaves the node must let the copies out: they leave with the client’s source address and the service address as destination, untracked by conntrack (ct state untracked). A ruleset that filters only what comes in needs nothing. The handoff’s tables are named janus_handoff: a ruleset can’t use the name.
A member reads another’s connections over the cluster’s own mTLS - member certificates, as for the keys -: addresses and ports, never what goes through them.
The copies cost a lookup per packet on the service addresses while a handoff lasts, and the readings a list of every connection every few seconds (every 30 seconds after the first two minutes).

Waiting for the balancer

A RouterOS hook is read: the router’s routes to the service prefixes, each member’s role - in service when every prefix’s route through it is active (multipath or master). A webhook is asked, when it says it can answer (It answers check calls, "confirm": true): a POST like the others, event check and member the one asked about. It changes nothing; the receiver answers 200 and {"in_service": true} when it sends that member traffic now, false otherwise - anything else is an error, asked again.

Update in place or recycle? Update in place keeps whatever points at a member - firewall rules, NAT, DHCP reservations, monitoring, inventories - and needs no room for one more machine. Recycle for what an update can’t do: fresh disks, another hypervisor or size, a member created from an image URL, a node that isn’t one of the Controller’s machines and has no spare to take its place… A member with a static address keeps it either way, recycled into a node you name, or updated in place.

Through the API: POST /api/clusters/{id}/upgrade {"version": "v2026.10.29"} - members, new_image with extensions, haproxy, kernel, and reboot_mode (kexec) when you need them; wait_balancer (true), settle_seconds and handoff ({"grace_seconds": 120, "keep_seconds": 3600}, both optional) for the traffic - GET /api/clusters/{id}/upgrade-options says which the cluster can have, and why not. A member that is one of the Controller’s machines goes through the machine’s own update, so its record - and a Terraform plan - follow. PATCH /api/machines/{id} with a new version or image on a cluster’s member goes through the same sequence, for that member alone.

Without a Controller:

janusctl cluster upgrade edge v2026.10.29     # the release's own image
janusctl cluster upgrade edge https://bundles.example.net/janus/ \
  -members lb-2,lb-1 -kexec                   # a bundle of your own
janusctl cluster upgrade edge v2026.10.29 \
  -handoff -handoff-grace 5m -wait-balancer   # connections handed over

Recycling a member

Recycle replaces a member by a new one - a newer release, another image, a VM on fresh disks - and the traffic moves once:

The newcomer joins drained: checked, given its certificate, the others told, the secrets and the cluster’s version applied - its VRRP stays BACKUP, its BGP routes unannounced - until its HAProxy has learnt the stick tables from a peer.
It comes into service as the member is drained: the virtual IP or the routes move from the member to it (or a peer), whose tables are full; the member’s established connections finish.
The member leaves. When it was one of the Controller’s machines, the machine is destroyed.

When the member is one of the Controller’s machines, the newcomer is a new machine like it - same hypervisor, size, networks (new MACs), extensions - named <cluster>-<n>, at the release you give or the member’s. A member with a static address, or a node that isn’t a machine, is recycled into a node you name: one of the Controller’s, trusting the fleet, in no cluster.

A failure while the newcomer joins takes it out again - and destroys it when the Controller made it -: the cluster is as it was. Its template variables are the member’s. It may run another image lets the newcomer’s schematic differ from the members’: how a cluster changes extensions, HAProxy branch or kernel, member by member.

The member left out stays drained until it reboots (janusctl -n NODE cluster undrain to use it again).

Scaling

A cluster made on new machines gains and loses members - the cluster’s Members tab, Scaling:

Members, set by hand (POST /api/clusters/{id}/scale {"members": 3}): a member more is a new machine like the newest member’s - its size, networks, extensions and template variables -, placed with the cluster’s anti-affinity, within the host’s free memory; a member less is the newest, drained, taken out, its machine destroyed. One step at a time. A count the hosts, their memory or the policy’s ceilings can’t give is refused at once (400), saying why, before anything is made.
Auto-scaling (PUT /api/clusters/{id}/autoscale): observe journals what it would do and the count it would have; on does it; off. It reads every member’s load every 15 seconds - HAProxy’s idle time and the CPUs’ averaged, the connections’ share of maxconn the highest - and adds a member when, over 5 minutes, HAProxy idles below 30 %, the CPUs are busier than 75 % or the connections above 70 %; it takes one out when one fewer would still stay quiet on every count for 30 minutes. 10 minutes between a step out and the next, 30 after a step in, 2 steps an hour at most, never below min_members (2) nor above max_members, nor beyond max_vcpus/max_memory_mib in all; no step out while the members’ vCPUs wait for their hosts (steal above 10 %). Thresholds are the policy’s (out_idle_percent, in_after_seconds…), checked for hysteresis.
Members set by hand while auto-scaling is on pause it, journaled; saving the policy again resumes it.

curl -X PUT https://controller:8080/api/clusters/$CLUSTER/autoscale -H "Authorization: Bearer $JANUS_TOKEN" \
  -d '{"mode": "observe", "min_members": 2, "max_members": 5, "max_vcpus": 20}'

As code: Terraform’s janus_cluster makes such a cluster, its members and autoscaling changed in place.

The members’ load, auto-scaled or not, is each cluster’s load in GET /api/clusters/{id} and janus_cluster_load_* on the Controller’s Prometheus endpoint (the Controller’s metrics) - for a scheduler of your own, or an alert.

Not for a VRRP cluster: one member holds each virtual IP, a member more adds no capacity - grow its machines instead (auto-scaling). Horizontal scaling suits BGP/ECMP clusters, or a balancer in front that sends to every member.

A balancer in front

When something in front spreads the traffic over the members - a cloud load balancer, a router’s static ECMP routes, another HAProxy -, it must know which members take it: a new one once it serves, a leaving one before it stops. The cluster’s balancer hook tells it: the cluster’s Members tab, Balancer in front, Set a hook (or PUT /api/clusters/{id}/balancer, janusctl cluster balancer).

When: a member comes into service - it joined, was undrained, took a recycled member’s place - and before one goes out of it - drained, removed, recycled, a step in. The operation waits for the hook’s answer (2xx), then the drain delay (its connections finishing on the balancer’s side), and only then drains the member. A hook that doesn’t answer stops that operation: the member serves on (“the balancer wasn’t told …”), until the hook is fixed - or a removal with force, for a node gone for good.
What: a POST of JSON, every member each time - the receiver makes its targets the members in_service, and a call it missed is made good by the next:
```
{
  "cluster_id": "f48ca9b8-0742-4188-943f-88a8e37cd36f",
  "cluster": "edge",
  "event": "out",
  "member": "edge-1",
  "members": [
    {"name": "edge-1", "address": "10.0.30.11", "in_service": false, "vars": {"priority": "150"}},
    {"name": "edge-2", "address": "10.0.30.12", "in_service": true, "vars": {"priority": "100"}}
  ],
  "at": "2026-10-25T17:02:11Z"
}
```
event is in, out (member names the one) or sync - the list again: the hook saved, a member gone, a call that had failed. With It answers check calls ("confirm": true), also check: a question an update asks (Waiting for the balancer). address is the one the members reach each other on; a member’s template variables come along, for an address or a weight of your own (public_address=...).
Signed, with a secret: X-Janus-Signature-256: sha256=<hex> is the HMAC-SHA256 of the raw body, as GitHub signs its webhooks - check it in constant time. X-Janus-Event repeats the event. HTTPS against the system’s CAs, or only the CA you give; plain HTTP is allowed for a receiver beside the balancer, signed then.
A failed call is tried three times (a 4xx once). The cluster shows it among its problems, and the 10-minute check calls again until one goes through - and whenever the list changed since the last call delivered (a member drained on the node itself, say).
Drain a member through the cluster - its Drain button, the API - for the balancer to be told first: janusctl -n NODE cluster drain drains the node alone, and the balancer hears of it only at the next check.
Let the balancer send a request again when its answer comes back empty. Every member’s HAProxy reloads when the cluster’s members change - its peers section names them - and when a version is applied. The old process closes its idle keep-alive connections, and a balancer that keeps connections to the members can send a request on one at that very moment: it gets nothing back. For an HAProxy in front:
```
backend janus_members
  retries 3
  retry-on conn-failure empty-response response-timeout
  option redispatch
```
v2026.10.25-2’s lab campaign, through an HAProxy in front under 25,000 requests a second: 5 to 11 requests in 5 million broke as a member came in or went out without it, none with it.

A receiver can be a few lines - this one keeps the members in service in a file another tool (a router’s configuration, an HAProxy map) reads:

import hashlib, hmac, json, os
from http.server import BaseHTTPRequestHandler, HTTPServer

SECRET = open("/etc/janus-hook.secret", "rb").read().strip()

class Hook(BaseHTTPRequestHandler):
    def do_POST(self):
        body = self.rfile.read(int(self.headers["Content-Length"]))
        want = "sha256=" + hmac.new(SECRET, body, hashlib.sha256).hexdigest()
        if not hmac.compare_digest(want, self.headers.get("X-Janus-Signature-256", "")):
            self.send_response(403); self.end_headers(); return
        call = json.loads(body)
        targets = [m["address"] for m in call["members"] if m["in_service"]]
        with open("/run/edge-targets.tmp", "w") as f:
            f.write("\n".join(targets) + "\n")
        os.replace("/run/edge-targets.tmp", "/run/edge-targets")
        self.send_response(204); self.end_headers()

HTTPServer(("0.0.0.0", 8099), Hook).serve_forever()

RouterOS

A MikroTik router in front (RouterOS 7) needs no receiver: the cluster keeps its routes itself, over its REST API. On the card, Kind: RouterOS - ECMP routes ("kind": "routeros" in the API, -kind routeros for janusctl cluster balancer, Terraform’s kind).

What it writes: for each service prefix, a static route per member in service - dst-address the prefix, gateway the member’s address (or its balancer_gateway variable, when the router reaches it on another), the same distance (1) in the same routing table (main) - each with the comment janus-cluster:<cluster id>. Routes to one prefix at one distance are equal for RouterOS 7: it spreads the flows over them (ECMP). A route without that comment is never touched.
Read only (read_only, the card’s Read only box, -read-only yes, Terraform’s read_only) for a cluster whose members announce the prefixes over BGP: the routes are theirs, the cluster writes none - it removes those it wrote before - and reads them, each member’s role per prefix: multipath (its route active, one of several equal ones), master (the only active one), backup (present, not active), absent (no route through it). The card shows them (“Router says”), each member’s page too, next to what the node itself announces, and janusctl cluster balancer NAME. An IPv6 route’s next hop is the member’s link-local address: matched with the addresses on its interfaces. The router user needs no write right (policy=read,api,rest-api); distance and check_gateway are for the routes it writes. A router the Controller can’t reach: the pages show the node’s side alone.
When: as for a hook. A member’s route goes before it is drained - the operation waits for the router’s answer, then the drain delay -, comes back once it serves again; every check reads the routes and puts back a change made on the router (a route removed by hand, another distance) - journaled “the router’s routes put back”. A router that doesn’t answer stops a drain or a removal, the member serving on.
Connections already open move: ECMP has no memory of them - a route removed or added hashes some of them to another member, which resets them (a lab, 16 keep-alive connections: 9 reset at a drain, 8 when the member came back). New connections lose nothing, and the drain delay doesn’t help: clients connect again. Long-lived ones (a WebSocket, a gRPC stream) fare better behind a balancer that keeps them, or a virtual IP.
How the flows spread: by default RouterOS hashes on the addresses only (ipv4-multipath-hash-policy=l3) - every connection from one client, or from behind one NAT, goes to the same member. l4 adds the ports, and spreads them; then keep the service prefixes out of FastTrack, or about one connection in five is reset (RouterOS 7.24, measured):
```
/ip settings set ipv4-multipath-hash-policy=l4
/ip firewall filter add chain=forward action=accept dst-address=192.0.2.10/32 place-before=[find action=fasttrack-connection]
/ip firewall filter add chain=forward action=accept src-address=192.0.2.10/32 place-before=[find action=fasttrack-connection]
```
The members carry the service address: each has it on an interface (a /32, as for BGP anycast), and HAProxy binds it. Not for a VRRP cluster’s virtual IPs: one member holds each.
check-gateway (check_gateway): the router pings each member and leaves out one that stops answering, without waiting for a drain or the next check - a member down, not drained, stops getting flows after 10 to 20 s (its pings every 10 s; 15 s in a lab), and the connections hashed to it fail until then. Its members must answer ICMP echo.
Its access: REST over HTTPS (www-ssl), a user of its own in a group with no more than it needs:
```
/user group add name=janus-hook policy=read,write,api,rest-api
/user add name=janus-hook group=janus-hook password=... address=203.0.113.5/32
/certificate add name=www common-name=router.example.net
/certificate sign www
/ip service set www-ssl certificate=www available-from=203.0.113.5/32 disabled=no
/certificate print detail where name=www
```
203.0.113.5 is the Controller’s address (or janusctl’s machine, without one) - available-from is RouterOS 7.24’s name. The last line gives the certificate’s fingerprint: its SHA-256, the one to pin (fingerprint) - or give its CA. A router whose input chain drops what it doesn’t list needs a rule for it too: /ip firewall filter add chain=input action=accept protocol=tcp src-address=203.0.113.5 dst-port=443 place-before=<its drop rule>. The password is the balancer’s secret, write-only. Plain HTTP only for a lab’s router (allow_http): the password goes with every call.
IPv6: an IPv6 prefix gets its routes in /ipv6/route, to the members’ IPv6 addresses (balancer_gateway).
Removed: the cluster’s balancer, or the cluster itself - the routes stay, the traffic flowing as it was. Remove them on the router when you mean to: /ip route remove [find comment="janus-cluster:<cluster id>"].

make routeros-hook-test runs it against MikroTik’s Cloud Hosted Router under QEMU, set up as above.

Watching it

The page shows what wants a look at the top of a cluster’s page, and what was done in its Journal tab; Check now looks at every member at once. Through the API:

GET /api/clusters/{id}: each member’s applied version, drift, released domains, peers up, stick tables in sync, certificate expiry, drain - and problems, worded for you.
GET /api/clusters/{id}/journal: what was done, by whom, member by member.
On a node: janusctl cluster status shows its peers as HAProxy sees them; its exporter has janus_cluster_info, janus_cluster_peer_up and janus_cluster_peer_table_synced (metrics).
In Prometheus: the Controller’s janus_cluster_member_* metrics (the Controller’s metrics) are what the page shows of each member; the janus-clusters alerts (alerts) watch the virtual address, the peers, drift and failed operations; the Grafana dashboard Janus · Clusters (the clusters’ dashboard) shows it all, member by member.
In your logs: what a member sends by log forwarding says its cluster and member name - orchestrator.cluster.name in Elasticsearch, RFC 5424 structured data in syslog - so one filter shows the whole cluster.

Without a Controller

A fleet without a Controller runs its clusters with janusctl cluster, from the fleet’s context on an admin’s machine: the same engine as the Controller’s - the same checks, the same order, the secrets moving from member to member - and the cluster kept in the context’s directory, next to its issuing CA: its versions, what each member runs, its journal, and its own CA, the key 0600 like issuing.key. The nodes are the context’s (janusctl fleet adopt), the machine signs as os:admin.

# lb-1's configuration becomes version 1, its keys every member's;
# -address: where the members reach each other, when the context
# reaches them another way (a NAT, a port forward).
janusctl cluster create edge -source lb-1 -dir edge/ \
  -address lb-1=192.0.2.11 -address lb-2=192.0.2.12 lb-1 lb-2

# The configuration is a directory - in git, say: haproxy.cfg, files/,
# keepalived.conf, bird.conf, firewall.nft. Apply makes a version of it.
janusctl cluster vars edge lb-1 priority=150
janusctl cluster vars edge lb-2 priority=100
$EDITOR edge/keepalived.conf
janusctl cluster apply edge edge/ -dry-run
janusctl cluster apply edge edge/ -manage haproxy,files,vrrp -m "VRRP"

janusctl cluster check edge          # each member; exits 1 when one wants a look
janusctl cluster certificate edge www.pem
janusctl cluster add edge lb-3 -address 192.0.2.13
janusctl cluster remove edge lb-3
janusctl cluster replace edge lb-1 lb-4 -address 192.0.2.14
janusctl cluster journal edge
janusctl cluster delete edge

Command	What it does
`create NAME NODE... -source NODE`	Checks, member certificates, the source’s configuration as version 1 on each, its secrets pulled; `-dir` writes version 1’s files to edit
`checkout NAME DIR`	A version’s files into DIR (`-version N`)
`apply NAME DIR`	DIR as the next version, applied member by member; `-dry-run` says what would change, `-manage` what the cluster manages from now on
`check NAME`	Each member’s version, peers, tables, certificate, drift; renews member certificates and rotates the ticket key ring when due - run it from cron
`vars NAME MEMBER KEY=VALUE...`	A member’s template variables (`KEY=` unsets one)
`certificate NAME FILE`	A certificate and its key for every member (`-crt-list`, `-sni`)
`add`, `remove NAME NODE`	A member in, out (drained first; `-force` for a node gone)
`replace NAME OLD NEW`	NEW, a node of the context, takes OLD’s place: joins drained, learns the tables, comes into service as OLD is drained and leaves (`-var`, `-new-image`)
`upgrade NAME VERSION\|URL`	The members updated in place, one at a time, from the release’s assets or a bundle’s URL (`-members`, `-kexec`, `-allow-schematic-change`, `-version` for a URL’s bundle)
`tickets NAME`	A new TLS ticket key, pulled by the members (`-renew`: every key replaced - what a member’s departure does)
`list`, `journal NAME`, `delete NAME`	The clusters; what was done; every member leaves

The members’ own primitives work on one node as before: janusctl -n lb-1 cluster drain, cluster status, cluster release haproxy.

The locks are advisory here: a write to what the cluster manages is refused on a member - its page, haproxy apply-config - except from an administrator’s certificate that sends the cluster’s id, which janusctl cluster does. They keep a member from drifting by accident, not an administrator out. A drift shows in check, and the next apply puts the member back.

Where the cluster lives: one machine’s context directory orchestrates it. Back that directory up with the fleet’s; another admin machine takes the cluster over with a copy of clusters/<id>/.

The API

Readers see clusters, administrators change them.

Call	What it does
`GET`, `POST /api/clusters`	list; create (`{name, source, members: [{node_id, name, address, api_address, vars}], managed, peers_port}`, or `{name, machines: {count, spec, hypervisors, anti_affinity, seed_from}}` - from a node)
`GET`, `PATCH`, `DELETE /api/clusters/{id}`	one; change `secrets_from` or members’ `vars`; delete (every member leaves; `?force=true`: even those that don’t answer; `?machines=destroy`: the members that are the Controller’s machines destroyed too, once they left)
`POST /api/clusters/{id}/members`, `DELETE .../members/{name}`	add one; remove one (`?force=true`)
`POST .../members/{name}/drain`, `.../undrain`	out of service, back
`POST /api/clusters/{id}/scale`	bring a cluster made on hypervisors to `{members}`, one step at a time
`PUT /api/clusters/{id}/autoscale`	its auto-scaling: `{mode, min_members, max_members, max_vcpus, max_memory_mib, ...thresholds}`
`PUT /api/clusters/{id}/balancer`	its balancer hook: `{kind, url, ca_cert, fingerprint, drain_delay_seconds, secret}` - a RouterOS router’s also `{user, prefixes, distance, routing_table, check_gateway, allow_http, read_only}`; the secret write-only (a router’s: its user’s password), left out to keep it, `""` to remove it; the hook is called at once
`DELETE /api/clusters/{id}/balancer`	no hook any more
`POST /api/clusters/{id}/balancer/sync`	call the hook with the members now (502 with its failure)
`POST /api/clusters/{id}/upgrade`	update the members in place, one at a time (`{members, version, new_image, extensions, haproxy, kernel, reboot_mode}`)
`POST /api/clusters/{id}/recycle`	replace members one at a time (`{members, with: {member: {node_id, name, address}}, version, new_image}`; a member without `with` gets a new machine like its own)
`GET`, `POST /api/clusters/{id}/versions`, `GET .../versions/{n}`	the versions; a new one (`{base, files, delete, note}`); one, with its files
`POST /api/clusters/{id}/apply`	apply a version (`{version, managed}`)
`POST /api/clusters/{id}/certificates`	a certificate for every member (`{name, pem, crt_list, sni}`)
`POST /api/clusters/{id}/pull`	the members pull the secrets again
`POST /api/clusters/{id}/check`	look at every member now
`GET /api/clusters/{id}/journal`	what was done (`?n=`)
`GET /api/clusters/{id}/router`	its RouterOS router’s routes as read: `{available, read_only, read_at, members: {name: [{prefix, role, active, total}]}, error}` - `available` false without such a hook

What takes a while answers 202 and runs in the background, 409 while another operation runs on the same cluster.